Published at Saturday, 30 March 2019. Industrial Machinery. By Alaine Mercier.
In Conclusion. As you can see there is not much to making rip, cross, or compound cuts. Using the fence and miter gouge is something you can get the hang of very quickly. But as easy as it is, the biggest mistake you can make is to become complacent when using a table saw. Remember you are handling a very powerful tool with an incredibly sharp blade that rotates at several thousand RPM. Always make sure to follow the safety measures, and you will be fine.
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
If finer cuts are what you have set out to achieve, a crosscut blade is the better option. The resulting cut is much smoother, but because the teeth have less space for chip removal and because there are more teeth to cut through the wood, the feed rate is much slower. If you need both speed and smooth finish, there are combination blades, which attempt to do both. Also, you may come across special cut blades. These are either designed to cut through certain materials like plywood, hardwood, metal, plastic, or even brick, or they are designed to make specialized cuts for the purpose of joint making. This includes sets of dado blades.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.