Published at Saturday, 30 March 2019. Industrial Machinery. By Alaine Mercier.
Safety Considerations. When making cross-cuts avoid using the miter gouge and fence at the same time. Why? Because when you slide the board towards the saw using a miter gouge the board will most likely bind against the fence. At this point I should remind you this will most likely cause kickback which will throw the board back at you, and at high speed! This is something you definitely don't want to happen – ever. My advice would be to dismount the fence, or set it a decent distance away from the board.
Dust Collection. Dust collection port Having sawdust all over your workshop and work surface is not only annoying, but it can make your job more difficult. It's much easier to work with wood if the table of the saw is smooth and clean. For this purpose most table saws have dust collection ports which can be attached to a vacuum. You may also come across saws that have a cloth pouch which you can attach to the saw so it collects all the dust in one “tidy” place.
There are some differences between T-square fences found on table saws. Some of them make use of bolts in order to mount the fence tube to the T-square head which is more like a characteristic of lighter duty fences found on hybrid and contractor saws. Heavy-duty fences found on cabinet saws have the fence tube welded to the T-square head.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.