Published at Saturday, 30 March 2019. Industrial Machinery. By Alaine Mercier.
On/Off Switch. The on/off switchThese days, table saws come with an on/off switch that allows for easy access should the situation call for it. Usually these switches are located at the front of the saw, and preferably the off button should be large enough to be operated using your entire hand (protected of course), elbow, or even your knee. The easier it is to switch the table saw off, the better.
Blade RPM. The maximum speed of a blade is usually expressed in RPM (revolutions per minute). One thing you need to look for is the speed of the table saw, which must never exceed the speed of the blade. Blades are designed to rotate at a certain speed, and using it on a table saw which exceeds that speed will cause the blade to break apart due to centrifugal force. This is pretty much everything you need to know about blades. If you decide you want to learn even more about blades and their properties, this should serve as a good base for you to build upon.
When you are making angled cuts simply align the sheet with the straight part of the miter gouge, and push it together with the miter gouge toward the blade. The saw will make the cut at an angle using the pivoting part of the miter gouge. Whereas fences allow you to make rip cuts, miter gouges provide you with a lot more options. You can make both square and angled cross-cuts as well as specialty cuts. In order to make a cross-cut, you need to slide the miter gouge back toward you. You then need to put the board against the straight part of the gouge.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.