Published at Tuesday, January 15th 2019. by Adriene Michel in Industrial Machinery.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
The blade tilt hand wheel is located on the side of the saw and allows you to tilt the blade up to 45 degrees away from the fence. The hand wheel which allows you to adjust the tilt of the saw blade is usually located on the left or right side of the unit depending on which way the arbor is made to tilt. Portable table saws usually don't give you as much control as professional cabinet saws though, and they often combine elevation and tilt adjustment in one wheel.
Fence and Miter Gouge Considerations Explained. Table saws are used primarily for ripping lumber, and in order to rip wood down to the desired width every table saw needs a fence. It's one of the most crucial components, so I thought the information below would come in handy for a lot of you.
Essential Information on Table Saw Blades. On this website, I repeatedly maintain how useful table saws are and how much work you can get done if you learn to use them properly. At this point, we're going to assume you've done your homework and decided on a particular type of table saw, or maybe even a particular model, but your work is not quite done yet. Depending on your projects, sooner or later you are going to have to change the blade from the original one that comes with the table saw when you buy it. The choice of the right blade is crucial, and you will need to consider the type of material you will be cutting as well as its thickness.
Blade Teeth. Blade teeth the more teeth on a blade, the smoother the cut. The majority of blades have between 24 and 80 teeth, expect for blades specifically designed to cut through certain materials. Why would you go with more or fewer teeth? More teeth ensures that the cut is smoother, but it also means the cutting will be done more slowly. Fewer teeth means faster cutting, but the cut will be rougher. A word to the wise: Do NOT EVER attempt to make the cutting faster by pushing the wood onto the blade. The only thing this will do is cause kickback, which will eject the wood back at you at a high rate of speed and potentially hurt you severely. So just be patient.
There are some differences between T-square fences found on table saws. Some of them make use of bolts in order to mount the fence tube to the T-square head which is more like a characteristic of lighter duty fences found on hybrid and contractor saws. Heavy-duty fences found on cabinet saws have the fence tube welded to the T-square head.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.