Published at Monday, 18 March 2019. Industrial Machinery. By Nannette Fournier.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
If finer cuts are what you have set out to achieve, a crosscut blade is the better option. The resulting cut is much smoother, but because the teeth have less space for chip removal and because there are more teeth to cut through the wood, the feed rate is much slower. If you need both speed and smooth finish, there are combination blades, which attempt to do both. Also, you may come across special cut blades. These are either designed to cut through certain materials like plywood, hardwood, metal, plastic, or even brick, or they are designed to make specialized cuts for the purpose of joint making. This includes sets of dado blades.
Blade Materials. Diamond tipped masonry blades that are meant to cut plywood and hardwood are usually fabricated out of metal, but those that are designed to cut through harder materials require the use of even harder materials. The harder material is applied around the edge of the blade, with the metal core remaining intact.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.