Published at Wednesday, 27 March 2019. Industrial Machinery. By Alaine Mercier.
Blade Materials. Diamond tipped masonry blades that are meant to cut plywood and hardwood are usually fabricated out of metal, but those that are designed to cut through harder materials require the use of even harder materials. The harder material is applied around the edge of the blade, with the metal core remaining intact.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
Safety Considerations. When making cross-cuts avoid using the miter gouge and fence at the same time. Why? Because when you slide the board towards the saw using a miter gouge the board will most likely bind against the fence. At this point I should remind you this will most likely cause kickback which will throw the board back at you, and at high speed! This is something you definitely don't want to happen – ever. My advice would be to dismount the fence, or set it a decent distance away from the board.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.