Published at Wednesday, 27 March 2019. Industrial Machinery. By Alaine Mercier.
Blade Sizing. Blade Sizes there are two ways table saw blades are sized: their outside diameter, and the diameter of the mounting hole. Most standard blades for table saws are 8, 10 or 12 inches in diameter, but there are blades as small as 3 3/8 inches in diameter and as large as 30 inches in diameter. The bigger ones are designed for specific commercial purposes, of course, but man, that's a big blade!
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
Table Inserts. throat plate Table inserts, or throat plates as they are usually called are nothing more than thin pieces of metal or wood, mounted around the blade and leveled with the surface of the table. This prevents small pieces of wood from falling inside the arbor.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.