Published at Wednesday, 16 January 2019. Industrial Machinery. By Adriene Michel.
Obviously, the easiest way to know which blade fits your table saw would be to consult the instruction manual. Also, use some common sense. There is a finite amount of space inside the arbor, so you can't use just any blade. The space is also limited with the presence of a blade guard. Speaking of the arbor, the central arbor hole on most table saw blades is 5/8 inches in diameter, but then again, there are exceptions to that rule. If the diameter and the arbor are supported by the saw, you are on the right track.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
Blade Materials. Diamond tipped masonry blades that are meant to cut plywood and hardwood are usually fabricated out of metal, but those that are designed to cut through harder materials require the use of even harder materials. The harder material is applied around the edge of the blade, with the metal core remaining intact.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.