Published at Thursday, 17 January 2019. Industrial Machinery. By Adriene Michel.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
Instead of having you scavenge the Internet for what seems like forever in order to get the information you're after, I decided to compile this guide which explains most table saw basics. I am not going into things like rip fence and saw blades because they require more attention (and are therefore discussed in separate articles elsewhere on this website), here we'll discuss the more basic stuff. So, without further ado, let's take a look at what you can expect to be included in the price on most models of table saw out there.
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.