Published at Thursday, January 17th 2019. by Adriene Michel in Industrial Machinery.
For instance, the teeth on blades that cut through wood are made out of steel or carbon steel, which ensures their durability. Then there are masonry blades, which have diamond-tipped teeth, and you can also find blades that are made to cut through aluminum and steel. Such blades have teeth that are treated with hardened metal or tungsten carbide. Finally, there are blades designed to cut through PVC and acrylic materials, which have teeth made out of low-temperature tungsten carbide.
Choosing the wrong blade will result in poor woodwork at best, and turn into a potential accident at worst. Now, in order to get the most out of the saw you paid for with your hard-earned cash, and to avoid any saw-related accidents, you need to learn a thing or two about the blades. This short guide I put together should teach you what you need to know. Check it out.
I would also recommend you to look for switches that have a “sunk” or plastic cover which prevent you from turning the saw on accidentally. If you have kids running around the shop, consider a saw that comes with the ability to add a padlock. Actually, this comes in useful even if you don't have kids who are likely to gain access to your workshop.
Table Inserts. throat plate Table inserts, or throat plates as they are usually called are nothing more than thin pieces of metal or wood, mounted around the blade and leveled with the surface of the table. This prevents small pieces of wood from falling inside the arbor.
Blade Teeth. Blade teeth the more teeth on a blade, the smoother the cut. The majority of blades have between 24 and 80 teeth, expect for blades specifically designed to cut through certain materials. Why would you go with more or fewer teeth? More teeth ensures that the cut is smoother, but it also means the cutting will be done more slowly. Fewer teeth means faster cutting, but the cut will be rougher. A word to the wise: Do NOT EVER attempt to make the cutting faster by pushing the wood onto the blade. The only thing this will do is cause kickback, which will eject the wood back at you at a high rate of speed and potentially hurt you severely. So just be patient.
Dust Collection. Dust collection port Having sawdust all over your workshop and work surface is not only annoying, but it can make your job more difficult. It's much easier to work with wood if the table of the saw is smooth and clean. For this purpose most table saws have dust collection ports which can be attached to a vacuum. You may also come across saws that have a cloth pouch which you can attach to the saw so it collects all the dust in one “tidy” place.
Miter Gouge. An Angled Cut Using a Miter Gouge. How does a miter gouge work? It's pretty simple. In essence it is a guiding device that moves inside the miter slot on the saw. The key component is the piece that sort of resembles a half-moon, and pivots around the point of its connection to the guide. Thanks to the locking mechanism you can choose any angle between 45 and -45 degrees.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.