Published at Tuesday, January 15th 2019. by Adelisa Legrand in Industrial Machinery.
Another option to think about is the magnetic switch. You can read more about this on my page about safety features, but in short this will prevent the motor from dangerous automatic restarts after power interruptions. A magnetic switch is more common on cabinet saws, but you may want to consider an upgrade on your contractor as well.
Blade Teeth. Blade teeth the more teeth on a blade, the smoother the cut. The majority of blades have between 24 and 80 teeth, expect for blades specifically designed to cut through certain materials. Why would you go with more or fewer teeth? More teeth ensures that the cut is smoother, but it also means the cutting will be done more slowly. Fewer teeth means faster cutting, but the cut will be rougher. A word to the wise: Do NOT EVER attempt to make the cutting faster by pushing the wood onto the blade. The only thing this will do is cause kickback, which will eject the wood back at you at a high rate of speed and potentially hurt you severely. So just be patient.
One thing you have to keep in mind is to slide the wood a bit slower than you normally would because the movement of the gouge can move it out of place. To make sure this doesn't happen you can secure the board to the gouge using a clamp. Thanks to a miter gouge you can also make compound cuts. Compounds cuts are made by setting the miter gouge at a desired angle and bevel of the saw blade at the same time.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
Blade Adjustments. Axis Adjustment Modern table saws allow the blade to be adjusted in various ways. The blade can be adjusted both vertically and by changing its axis. Vertical adjustments are made by exposing more of the blade, which changes the depth of cut. This comes in handy for thick pieces of wood as well as for non-through cuts. By adjusting the axis of the blade, you can make cuts at a certain angle, thus making bevel cuts, which are good for creating joints.
Essential Information on Table Saw Blades. On this website, I repeatedly maintain how useful table saws are and how much work you can get done if you learn to use them properly. At this point, we're going to assume you've done your homework and decided on a particular type of table saw, or maybe even a particular model, but your work is not quite done yet. Depending on your projects, sooner or later you are going to have to change the blade from the original one that comes with the table saw when you buy it. The choice of the right blade is crucial, and you will need to consider the type of material you will be cutting as well as its thickness.
Instead of having you scavenge the Internet for what seems like forever in order to get the information you're after, I decided to compile this guide which explains most table saw basics. I am not going into things like rip fence and saw blades because they require more attention (and are therefore discussed in separate articles elsewhere on this website), here we'll discuss the more basic stuff. So, without further ado, let's take a look at what you can expect to be included in the price on most models of table saw out there.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.