Published at Wednesday, 16 January 2019. Industrial Machinery. By Alaine Mercier.
If finer cuts are what you have set out to achieve, a crosscut blade is the better option. The resulting cut is much smoother, but because the teeth have less space for chip removal and because there are more teeth to cut through the wood, the feed rate is much slower. If you need both speed and smooth finish, there are combination blades, which attempt to do both. Also, you may come across special cut blades. These are either designed to cut through certain materials like plywood, hardwood, metal, plastic, or even brick, or they are designed to make specialized cuts for the purpose of joint making. This includes sets of dado blades.
Blade Adjustments. Axis Adjustment Modern table saws allow the blade to be adjusted in various ways. The blade can be adjusted both vertically and by changing its axis. Vertical adjustments are made by exposing more of the blade, which changes the depth of cut. This comes in handy for thick pieces of wood as well as for non-through cuts. By adjusting the axis of the blade, you can make cuts at a certain angle, thus making bevel cuts, which are good for creating joints.
Elevation and Tilt Wheels. Elevations and tilt hand wheel The blade elevation hand wheel is usually located on the front of the saw and allows you to control the height of the blade, which effectively controls the depth of cut. In the case of 10-inch blades, the blade should be exposed around 3-5/8 inches at its maximum height which is sufficient to cut through a 4 x 4 in a single pass.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.