Published at Friday, 18 January 2019. Industrial Machinery. By Allete Carpentier.
Obviously, the easiest way to know which blade fits your table saw would be to consult the instruction manual. Also, use some common sense. There is a finite amount of space inside the arbor, so you can't use just any blade. The space is also limited with the presence of a blade guard. Speaking of the arbor, the central arbor hole on most table saw blades is 5/8 inches in diameter, but then again, there are exceptions to that rule. If the diameter and the arbor are supported by the saw, you are on the right track.
Safety Considerations. When making cross-cuts avoid using the miter gouge and fence at the same time. Why? Because when you slide the board towards the saw using a miter gouge the board will most likely bind against the fence. At this point I should remind you this will most likely cause kickback which will throw the board back at you, and at high speed! This is something you definitely don't want to happen – ever. My advice would be to dismount the fence, or set it a decent distance away from the board.
Riving knife an even better option would be to consider a table saw with a riving knife instead of a splitter. While both do roughly the same thing, there are some key differences between the two. The disadvantage of having a splitter instead of a riving knife is that the splitter is fixed, which means it doesn't move along with the blade. Because it's fixed, a splitter needs to be removed when making cross, non-through, and dado cuts. Unfortunately, many people tend to forget to put the splitter back in place when they start making rip cuts. So if you have a table saw which uses a splitter to prevent kickback, always remember to double-check that the splitter is in place.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.