Published at Friday, 18 January 2019. Industrial Machinery. By Allete Carpentier.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
Blade Adjustments. Axis Adjustment Modern table saws allow the blade to be adjusted in various ways. The blade can be adjusted both vertically and by changing its axis. Vertical adjustments are made by exposing more of the blade, which changes the depth of cut. This comes in handy for thick pieces of wood as well as for non-through cuts. By adjusting the axis of the blade, you can make cuts at a certain angle, thus making bevel cuts, which are good for creating joints.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.