Published at Friday, January 18th 2019. by Alair Le in Industrial Machinery.
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
Essential Information on Table Saw Blades. On this website, I repeatedly maintain how useful table saws are and how much work you can get done if you learn to use them properly. At this point, we're going to assume you've done your homework and decided on a particular type of table saw, or maybe even a particular model, but your work is not quite done yet. Depending on your projects, sooner or later you are going to have to change the blade from the original one that comes with the table saw when you buy it. The choice of the right blade is crucial, and you will need to consider the type of material you will be cutting as well as its thickness.
Now, the most common type of fence found on table saws at the moment (especially the cabinet type) is the Biesenmeyer Commercial “T-square” fence, or in most cases manufacturer's copies and offshoots of that design. It's the most popular design because it is easy to adjust and operate, is made out of welded steel, accurate, and best of all there is not much that can go wrong with it.
In the past, table saw blades were meant to cut only wood, but they are now able to cut through metal, plastic, and other materials. Mind you, most blades are still fabricated out of metal, but some also feature special alloys and materials in the teeth, and various carbon composites for the body. Before deciding on a blade, you need to look at several characteristics such as its diameter, the material it's made of, the material it's designed to cut, number of teeth, maximum speed, and price, among others. Of course, the blade needs to match your table saw as well. Now, let's see how you do all that.
The blade tilt hand wheel is located on the side of the saw and allows you to tilt the blade up to 45 degrees away from the fence. The hand wheel which allows you to adjust the tilt of the saw blade is usually located on the left or right side of the unit depending on which way the arbor is made to tilt. Portable table saws usually don't give you as much control as professional cabinet saws though, and they often combine elevation and tilt adjustment in one wheel.
Splitter and Anti Kickback PawlsOne of the leading causes of table saw related accidents is kickback, which occurs when a piece of wood gets ejected at high speed, back toward the operator. This can cause some serious injuries. This happens when the wood binds between the fence and the blade, and then gets caught by the teeth on the back on the blade. In order to prevent that from happening, many table saws are fitted with a splitter. A splitter is basically a small vertical blade made of metal or plastic, which holds the Cerf open behind the table saw blade. It's a simple solution that works, up to a certain point.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.