Published at Friday, 18 January 2019. Industrial Machinery. By Alaine Mercier.
On/Off Switch. The on/off switchThese days, table saws come with an on/off switch that allows for easy access should the situation call for it. Usually these switches are located at the front of the saw, and preferably the off button should be large enough to be operated using your entire hand (protected of course), elbow, or even your knee. The easier it is to switch the table saw off, the better.
Riving knife an even better option would be to consider a table saw with a riving knife instead of a splitter. While both do roughly the same thing, there are some key differences between the two. The disadvantage of having a splitter instead of a riving knife is that the splitter is fixed, which means it doesn't move along with the blade. Because it's fixed, a splitter needs to be removed when making cross, non-through, and dado cuts. Unfortunately, many people tend to forget to put the splitter back in place when they start making rip cuts. So if you have a table saw which uses a splitter to prevent kickback, always remember to double-check that the splitter is in place.
Push Stick; if you are not the lucky owner of a saw with the SawStop safety system, you are going to need a push stick, which comes in handy when you need to slide the wood through the blade. Having your hands too close to the saw blade is never a good thing, so it is a wise idea to rely on a push stick. You can get one at just about any shop that sells woodwork supplies, or make one yourself. There are plenty of tutorials on line to teach you how to do so.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.