Published at Wednesday, 16 January 2019. Industrial Machinery. By Adelisa Legrand.
The Fence. One crucial component of every table saw along with the engine and blade is the fence. In fact, making a precise rip cut would be impossible without it. There is basically one type of fence most table saw manufacturers tend to use, but before we get into that let's go over the main characteristics a good fence should have. First of all the fence should allow for easy and hassle-free adjustment both horizontally and vertically. The fence should also sit on the rails firmly, and there should be NO “wiggle” room apart from the sliding.
Blade RPM. The maximum speed of a blade is usually expressed in RPM (revolutions per minute). One thing you need to look for is the speed of the table saw, which must never exceed the speed of the blade. Blades are designed to rotate at a certain speed, and using it on a table saw which exceeds that speed will cause the blade to break apart due to centrifugal force. This is pretty much everything you need to know about blades. If you decide you want to learn even more about blades and their properties, this should serve as a good base for you to build upon.
Blade Adjustments. Axis Adjustment Modern table saws allow the blade to be adjusted in various ways. The blade can be adjusted both vertically and by changing its axis. Vertical adjustments are made by exposing more of the blade, which changes the depth of cut. This comes in handy for thick pieces of wood as well as for non-through cuts. By adjusting the axis of the blade, you can make cuts at a certain angle, thus making bevel cuts, which are good for creating joints.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.