Published at Wednesday, 16 January 2019. Industrial Machinery. By Aiglentina Fournier.
Blade Sizing. Blade Sizes there are two ways table saw blades are sized: their outside diameter, and the diameter of the mounting hole. Most standard blades for table saws are 8, 10 or 12 inches in diameter, but there are blades as small as 3 3/8 inches in diameter and as large as 30 inches in diameter. The bigger ones are designed for specific commercial purposes, of course, but man, that's a big blade!
After you have penciled in a line where you want the cross-cut to be made, align it with the blade. With the saw turned on guide the miter gouge forward until the cut is made while making sure the board is firmly in place against the straight edge of the miter gouge. One of the simplest cuts a miter gouge allows you to make is a square cross-cut. Simply set the miter gouge at 90 degrees or zero (depending on the markings), and push the board toward the blade. The result will be a board that is cut square. You can also make angled cuts by setting the miter gouge at an angle of up to 45 degrees.
In the past, table saw blades were meant to cut only wood, but they are now able to cut through metal, plastic, and other materials. Mind you, most blades are still fabricated out of metal, but some also feature special alloys and materials in the teeth, and various carbon composites for the body. Before deciding on a blade, you need to look at several characteristics such as its diameter, the material it's made of, the material it's designed to cut, number of teeth, maximum speed, and price, among others. Of course, the blade needs to match your table saw as well. Now, let's see how you do all that.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.