Published at Thursday, 27 December 2018. Industrial Machinery. By Agathe David.
When the labor is so huge or heavy that it causes you to pay more attention to supporting it than cutting it, an extra hand or support procedure would be a good idea. Always let the machine build up to full speed before beginning.
Before the saw is turned on, the upper guides have to be adjusted for the height of the wood being cut. A good rule is to set the guide around 1/4″ above the top edge of the inventory. Retain in mind that the upper and lower guides are not guards, but are guides. The function of these guides is to support the blade and to help it run true. They also retain the blade from drifting and deflecting during the cut.
Cutting privileged corners that are whichever radius-ed or rounded can finest be accomplished by re-cutting on whichever the drill press or the mortise machine. This is a particularly handy idea when you have close-fitting ranges or want a high degree of accuracy. When cutting outside radii it would be a good idea to create relief cuts to help retain the back of the blade from binding in the Cerf.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.