Published at Friday, 29 March 2019. Industrial Machinery. By Adriene Michel.
Blade Sizing. Blade Sizes there are two ways table saw blades are sized: their outside diameter, and the diameter of the mounting hole. Most standard blades for table saws are 8, 10 or 12 inches in diameter, but there are blades as small as 3 3/8 inches in diameter and as large as 30 inches in diameter. The bigger ones are designed for specific commercial purposes, of course, but man, that's a big blade!
Elevation and Tilt Wheels. Elevations and tilt hand wheel The blade elevation hand wheel is usually located on the front of the saw and allows you to control the height of the blade, which effectively controls the depth of cut. In the case of 10-inch blades, the blade should be exposed around 3-5/8 inches at its maximum height which is sufficient to cut through a 4 x 4 in a single pass.
Safety Considerations. When making cross-cuts avoid using the miter gouge and fence at the same time. Why? Because when you slide the board towards the saw using a miter gouge the board will most likely bind against the fence. At this point I should remind you this will most likely cause kickback which will throw the board back at you, and at high speed! This is something you definitely don't want to happen – ever. My advice would be to dismount the fence, or set it a decent distance away from the board.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.