Published at Saturday, 16 March 2019. Industrial Machinery. By Adriene Michel.
Splitter and Anti Kickback PawlsOne of the leading causes of table saw related accidents is kickback, which occurs when a piece of wood gets ejected at high speed, back toward the operator. This can cause some serious injuries. This happens when the wood binds between the fence and the blade, and then gets caught by the teeth on the back on the blade. In order to prevent that from happening, many table saws are fitted with a splitter. A splitter is basically a small vertical blade made of metal or plastic, which holds the Cerf open behind the table saw blade. It's a simple solution that works, up to a certain point.
Blade Types. Rip vs. Crosscut blades the two basic types of table saw blades are rip and crosscut blades. Rip blades have a smaller number of teeth and larger gullets, which means there's more room to remove the shavings and dust. These blades are designed to cut along the grain of the material on the table, but although they cut faster, the resulting cuts are rougher.
In Conclusion. As you can see there is not much to making rip, cross, or compound cuts. Using the fence and miter gouge is something you can get the hang of very quickly. But as easy as it is, the biggest mistake you can make is to become complacent when using a table saw. Remember you are handling a very powerful tool with an incredibly sharp blade that rotates at several thousand RPM. Always make sure to follow the safety measures, and you will be fine.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.