Published at Saturday, 16 March 2019. Industrial Machinery. By Adriene Michel.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
Riving knife an even better option would be to consider a table saw with a riving knife instead of a splitter. While both do roughly the same thing, there are some key differences between the two. The disadvantage of having a splitter instead of a riving knife is that the splitter is fixed, which means it doesn't move along with the blade. Because it's fixed, a splitter needs to be removed when making cross, non-through, and dado cuts. Unfortunately, many people tend to forget to put the splitter back in place when they start making rip cuts. So if you have a table saw which uses a splitter to prevent kickback, always remember to double-check that the splitter is in place.
Fence and Miter Gouge Considerations Explained. Table saws are used primarily for ripping lumber, and in order to rip wood down to the desired width every table saw needs a fence. It's one of the most crucial components, so I thought the information below would come in handy for a lot of you.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.