Published at Friday, 25 January 2019. Industrial Machinery. By Adriene Michel.
In Conclusion. As you can see there is not much to making rip, cross, or compound cuts. Using the fence and miter gouge is something you can get the hang of very quickly. But as easy as it is, the biggest mistake you can make is to become complacent when using a table saw. Remember you are handling a very powerful tool with an incredibly sharp blade that rotates at several thousand RPM. Always make sure to follow the safety measures, and you will be fine.
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
Blade RPM. The maximum speed of a blade is usually expressed in RPM (revolutions per minute). One thing you need to look for is the speed of the table saw, which must never exceed the speed of the blade. Blades are designed to rotate at a certain speed, and using it on a table saw which exceeds that speed will cause the blade to break apart due to centrifugal force. This is pretty much everything you need to know about blades. If you decide you want to learn even more about blades and their properties, this should serve as a good base for you to build upon.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.