Published at Monday, 03 December 2018. Industrial Machinery. By Albertina Billy.
.Saw‐bench, infinitely tilt able, for execution of miter cuts
.Rip fence for an execution of linear cuts
.Height adjustment for precise cuts with save use
.Ball⁃bearing guide for accurate cuts
.Push stick for save use
Mains supply 230 V
Frequency 50 Hz
Power 180 W
Max. power (S2 - 250 W | S2time - 15 min)
Idle speed 1400 min^-1
Throat 200 mm
Saw band 1400 mm x 7 mm
Number of saw teeth 6 / 25.4 mm
Saw band speed 900 m/min
Number of speed steps not adjustable
Max. cutting height at 45° 45 mm
Max. cutting height at 90° 80 mm
Size of working table 300 mm x 300 mm
Table tilt able -4 ° - 46 °
Diameter of suction adapter 36 mm
Dimension L370 x W280 x H720 mm
Net weight 13.2 kg
Gross weight 17.6 kg
Warranty 6 months
What would I improve with this saw? The fence is very good, but the scale on the edge guide refers only the the basic fence. Add the aluminium accessory fence with the markings are wrong! You have to add in the width of the fence to the markings on the scale.
On the subject of the fence, if you make it vertical, and cut small pieces, the fence can't get deeply close to the blade as the blade guide gets in the way!
A smaller fence as an optional accessory, perhaps? The miter fence is very basic. It has basic markings at 5 degree interlude, but I would use a miter gauge to check it. If this is important to you, buy a better one.
A work light‐shining on the cutting blade helps a lot especially if the saw is in a dark corner of the workshop.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.