Published at Wednesday, 02 January 2019. Industrial Machinery. By Agathe David.
Step 6 of 14:
I clamped all the legs together and sanded them down to the same distance using the grinding attachment on my angle grinder.
Step 4 of 14:
Next I started to eliminate the extra slices from the bed frame. These are the leg portions which I could have cut off but I chose to eliminate instead so that I could have the most substance left over. I used a drill to eliminate the nails and my angle grinder and a chisel. Eventually I got them off.
Step 1 of 14:
This is the 1/4 inch metal plate that a neighbor gave me it was very rusted but it was free. The first thing I did was try and eliminate the rust as best I could. I used my angle grinder with a flap disc attachment and then my orbital sander to clean off the rust.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.