Published at Monday, 14 January 2019. Industrial Machinery. By Adriene Michel.
The blade tilt hand wheel is located on the side of the saw and allows you to tilt the blade up to 45 degrees away from the fence. The hand wheel which allows you to adjust the tilt of the saw blade is usually located on the left or right side of the unit depending on which way the arbor is made to tilt. Portable table saws usually don't give you as much control as professional cabinet saws though, and they often combine elevation and tilt adjustment in one wheel.
Obviously, the easiest way to know which blade fits your table saw would be to consult the instruction manual. Also, use some common sense. There is a finite amount of space inside the arbor, so you can't use just any blade. The space is also limited with the presence of a blade guard. Speaking of the arbor, the central arbor hole on most table saw blades is 5/8 inches in diameter, but then again, there are exceptions to that rule. If the diameter and the arbor are supported by the saw, you are on the right track.
Elevation and Tilt Wheels. Elevations and tilt hand wheel The blade elevation hand wheel is usually located on the front of the saw and allows you to control the height of the blade, which effectively controls the depth of cut. In the case of 10-inch blades, the blade should be exposed around 3-5/8 inches at its maximum height which is sufficient to cut through a 4 x 4 in a single pass.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.