Published at Monday, 14 January 2019. Industrial Machinery. By Adriene Michel.
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
Also, table saws are equally adept at making cross-cuts and other more complex cuts. Now, in order to do that they rely on something called a miter gouge. I will go on to explain this further down below, because knowing how to cut wood using a miter gouge will even allow you to make angled and compound cuts. If I'm using terms you're totally unfamiliar with, don't worry about it because I've explained everything for you.
If finer cuts are what you have set out to achieve, a crosscut blade is the better option. The resulting cut is much smoother, but because the teeth have less space for chip removal and because there are more teeth to cut through the wood, the feed rate is much slower. If you need both speed and smooth finish, there are combination blades, which attempt to do both. Also, you may come across special cut blades. These are either designed to cut through certain materials like plywood, hardwood, metal, plastic, or even brick, or they are designed to make specialized cuts for the purpose of joint making. This includes sets of dado blades.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.