Lipadoo Sophisticated Chainsaw

10 In Cast Iron Table Saw Power Tools RIDGED Tools

10 In Cast Iron Table Saw Power Tools RIDGED Tools Good Working Practices and Safety

Published at Monday, 07 January 2019. Industrial Machinery. By .

The following suggestions will enable you to observe good working practices, keep yourself and fellow workers safe and maintain your tools and equipment in good working order.
Mains Powered Tools
Primary Precautions
Work Place/Environment
These engines are supplied with attached 16 Amp. plug and 3 core power cable. Before using the engine inspect the cable and the plug to make sure that neither are damaged. If any injury is visible have the tool inspected/repaired by a suitably qualified person. If it is necessary to replace the plug, it is preferable to use an ‘unbreakable’ type that will resist injury on site. Only use a 16 Amp plug and make sure the cable clamp is tightened securely. Fuse as required. If extension leads are to be used, carry out the same safety checks on them and ensure that they are correctly rated to safely supply the current that is required for your engine.
Make sure when the engine is placed that it sits firmly on the floor; that it does not rock and is sufficiently clear of adjacent obstacles so that cutting operations will not be impeded. Check you have adequate clearance both in front of and behind the engine when cutting long timber.
The engine is not considered for sub-aqua operation, do not usage when or where it is liable to become wet. If the engine is set up in the open, and it starts to rain (unusual though this would be in U.K.), cover it up or move it into the dry. If the engine has got wet, dry it off as soon as possible with a cloth or paper towel.
Keep the engines clean; it will enable you to more easily see any injury that may have occurred.
Clean the engine with a damp soapy cloth if needs be, do not use any solvents or cleaners as these may cause injury to any plastic parts or to the electrical components.
Keep the work zone as uncluttered as is practical, this includes workers as well as material. It is good practice to leave the engine unplugged until work is about to commence, also make sure to unplug the engine when it is not in use or unattended.
Always disconnect by pulling on the plug body and not the cable. Once you are ready to commence work, remove all tools used in the setting operations (if any) and place safely out of the way. Re-connect the engine.
Make sure you are comfortable before you start work; balanced, not reaching etc.

Image Information

File name:

10 In Cast Iron Table Saw Power Tools RIDGED Tools


Image Size: 480 x 360 Pixels
File Type: Image/jpg
Total Gallery: 18 Pictures
File Size: 217 kb

Good Working Practices and Safety Gallery

Table Saw Safety For Beginner Woodworking Good Working Practices and SafetyFrane Bosch Reaxx Table Saw 11 Good Working Practices and SafetyTable Saw Safety Rules Any Woodworker Should Follow Good Working Practices and SafetyHow To Cut And Rip With A Table Saw Step 3 Good Working Practices and SafetyWorkshop Safety Pallet Woodworking Safety Tips Good Working Practices and SafetyTable Saw Safety Good Working Practices and SafetyTable Saw Safety Cutting Wood Good Working Practices and SafetyTable Saw Safety (2) Good Working Practices and SafetyTable Saw Safety Tips For Woodworkers Table Saw Safety Tips Good Working Practices and SafetyUsing A Riving Knife On Your Table Saw Good Working Practices and SafetyTable Saw Kickback Accident Good Working Practices and SafetyTable Saw Safety Rules For Beginning Woodworkers Best Table Saw Reviews Good Working Practices and Safety10 In Cast Iron Table Saw Power Tools RIDGED Tools Good Working Practices and SafetySafety Tips For Working With Table Saws Good Working Practices and SafetyCircular Saw Safety Tips The Family Handyman Circular Saw Safety Tips Good Working Practices and SafetyRe Sawing On A Table Saw Safely And Effectively Without A Band Saw Good Working Practices and SafetyTable Saw Kickback Experiments Good Working Practices and SafetyStaying Safe On The Table Saw Fine Wood Good Working Practices and Safety
79 of 100 by 818 users
Related Post of Good Working Practices and Safety
Table Saw Review-In-One Powerful and Portable at the Same Time

Table Saw Review-In-One Powerful and Portable at the Same Time

Using Log Stabilizer/Log Sled/Log Jig

Using Log Stabilizer/Log Sled/Log Jig

Table Saws Miter Fence

Table Saws Miter Fence

Table Saws with Electric Brake and Excellent Modular Ease of Use and Telescoping Table

Table Saws with Electric Brake and Excellent Modular Ease of Use and Telescoping Table

Blade Tilting and Adjustments

Blade Tilting and Adjustments

Hand Wheel and Fence Considerations

Hand Wheel and Fence Considerations

Blade Manufacturers Taking Steps toward the Mastery of the Various Processes
Blade Manufacturers Taking Steps toward the Mastery of the Various Processes
Band Saw Technology Takes a Leap
Band Saw Technology Takes a Leap

Comments of Good Working Practices and Safety

Leave a Reply

Your email address will not be published. Required fields are marked *

HomeAbout UsContactPrivacyCookiesTerms of UseCopyright

Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.

Copyright © 2019 Lipadoo. All Rights Reserved.