Published at Wednesday, 16 January 2019. Industrial Machinery. By Aiglentina Fournier.
After you have penciled in a line where you want the cross-cut to be made, align it with the blade. With the saw turned on guide the miter gouge forward until the cut is made while making sure the board is firmly in place against the straight edge of the miter gouge. One of the simplest cuts a miter gouge allows you to make is a square cross-cut. Simply set the miter gouge at 90 degrees or zero (depending on the markings), and push the board toward the blade. The result will be a board that is cut square. You can also make angled cuts by setting the miter gouge at an angle of up to 45 degrees.
Splitter and Anti Kickback PawlsOne of the leading causes of table saw related accidents is kickback, which occurs when a piece of wood gets ejected at high speed, back toward the operator. This can cause some serious injuries. This happens when the wood binds between the fence and the blade, and then gets caught by the teeth on the back on the blade. In order to prevent that from happening, many table saws are fitted with a splitter. A splitter is basically a small vertical blade made of metal or plastic, which holds the Cerf open behind the table saw blade. It's a simple solution that works, up to a certain point.
If finer cuts are what you have set out to achieve, a crosscut blade is the better option. The resulting cut is much smoother, but because the teeth have less space for chip removal and because there are more teeth to cut through the wood, the feed rate is much slower. If you need both speed and smooth finish, there are combination blades, which attempt to do both. Also, you may come across special cut blades. These are either designed to cut through certain materials like plywood, hardwood, metal, plastic, or even brick, or they are designed to make specialized cuts for the purpose of joint making. This includes sets of dado blades.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.