Published at Monday, 14 January 2019. Industrial Machinery. By Adelisa Legrand.
After you have penciled in a line where you want the cross-cut to be made, align it with the blade. With the saw turned on guide the miter gouge forward until the cut is made while making sure the board is firmly in place against the straight edge of the miter gouge. One of the simplest cuts a miter gouge allows you to make is a square cross-cut. Simply set the miter gouge at 90 degrees or zero (depending on the markings), and push the board toward the blade. The result will be a board that is cut square. You can also make angled cuts by setting the miter gouge at an angle of up to 45 degrees.
Table Extensions. extensionsIt's pretty easy to conclude that a larger table surface allows for the manipulation of bigger sheets of material and larger rip capacity. A lot of table saws have extensions located on the right of the saw which allow you to rip through large boards, or even 4 x 8 sheets.
Splitter and Anti Kickback PawlsOne of the leading causes of table saw related accidents is kickback, which occurs when a piece of wood gets ejected at high speed, back toward the operator. This can cause some serious injuries. This happens when the wood binds between the fence and the blade, and then gets caught by the teeth on the back on the blade. In order to prevent that from happening, many table saws are fitted with a splitter. A splitter is basically a small vertical blade made of metal or plastic, which holds the Cerf open behind the table saw blade. It's a simple solution that works, up to a certain point.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.