Published at Friday, January 18th 2019. by Aiglentina Fournier in Industrial Machinery.
Another option to think about is the magnetic switch. You can read more about this on my page about safety features, but in short this will prevent the motor from dangerous automatic restarts after power interruptions. A magnetic switch is more common on cabinet saws, but you may want to consider an upgrade on your contractor as well.
Blade Adjustments. Axis Adjustment Modern table saws allow the blade to be adjusted in various ways. The blade can be adjusted both vertically and by changing its axis. Vertical adjustments are made by exposing more of the blade, which changes the depth of cut. This comes in handy for thick pieces of wood as well as for non-through cuts. By adjusting the axis of the blade, you can make cuts at a certain angle, thus making bevel cuts, which are good for creating joints.
Table Extensions. extensionsIt's pretty easy to conclude that a larger table surface allows for the manipulation of bigger sheets of material and larger rip capacity. A lot of table saws have extensions located on the right of the saw which allow you to rip through large boards, or even 4 x 8 sheets.
The blade tilt hand wheel is located on the side of the saw and allows you to tilt the blade up to 45 degrees away from the fence. The hand wheel which allows you to adjust the tilt of the saw blade is usually located on the left or right side of the unit depending on which way the arbor is made to tilt. Portable table saws usually don't give you as much control as professional cabinet saws though, and they often combine elevation and tilt adjustment in one wheel.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
Summary. I've kept this information relatively short and sweet, and you may have noticed I have neglected to mention some features which can be considered essential. However, fear not because I have plenty of other articles on my website designed to help you out with any question there might be in this respect. Of course, the best thing is you don't have to revert back to your main search engine because it's all here for you!
The Fence. One crucial component of every table saw along with the engine and blade is the fence. In fact, making a precise rip cut would be impossible without it. There is basically one type of fence most table saw manufacturers tend to use, but before we get into that let's go over the main characteristics a good fence should have. First of all the fence should allow for easy and hassle-free adjustment both horizontally and vertically. The fence should also sit on the rails firmly, and there should be NO “wiggle” room apart from the sliding.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.