Published at Sunday, 06 January 2019. Industrial Machinery. By Aiglentina Fournier.
2” diameter holly for cabinet door handles. If you have any logs or firewood, and thought around milling some of the nicer looking slices into lumber. Inventory room Supply has come up with a device that makes‐short work of re‐sawing logs up to 6" diameter into lumber.
The Small Ripper is a uncomplicated, easy to usage sled that securely holds a log although you guide it through the band saw blade. The sled is made of 1/8" sheet metal, 6" wide at the base, 6" high and 14" lengthy. It's very well machined, being less than .005" off square on the sample I tested. Two strong, jagged arms steadily hold the log in site; slots in the side of the sled allow you to increase or lower the arms to accommodate variously sized logs though two knurled elastic knobs relate compression on aluminum blocks that hold the arms in site. An aluminum bar (the runner) under the sled fits accurately into the miter slot on your band saw table. You can adjust the angle of the sled by means of the two adjustment screws located at each end of the runner. This enables you to adjust for blade drift. There is also a knurled knob in the midpoint of the runner that allows you to lock the sled in site; when re‐sawing big logs you will want to remove this knob. The sled has around 2" of side drive near the saw blade.
Inventory room Supply also has a 3/8" 4tpi blade available that makes the perfect accompaniment to this jig. When properly tension‐ed on the saw, the blade cuts exceptionally well, with a very good surface finish.
The Small Ripper
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.