Published at Thursday, 28 March 2019. Industrial Machinery. By Adelisa Legrand.
Blade Materials. Diamond tipped masonry blades that are meant to cut plywood and hardwood are usually fabricated out of metal, but those that are designed to cut through harder materials require the use of even harder materials. The harder material is applied around the edge of the blade, with the metal core remaining intact.
Obviously, the easiest way to know which blade fits your table saw would be to consult the instruction manual. Also, use some common sense. There is a finite amount of space inside the arbor, so you can't use just any blade. The space is also limited with the presence of a blade guard. Speaking of the arbor, the central arbor hole on most table saw blades is 5/8 inches in diameter, but then again, there are exceptions to that rule. If the diameter and the arbor are supported by the saw, you are on the right track.
When you are making angled cuts simply align the sheet with the straight part of the miter gouge, and push it together with the miter gouge toward the blade. The saw will make the cut at an angle using the pivoting part of the miter gouge. Whereas fences allow you to make rip cuts, miter gouges provide you with a lot more options. You can make both square and angled cross-cuts as well as specialty cuts. In order to make a cross-cut, you need to slide the miter gouge back toward you. You then need to put the board against the straight part of the gouge.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.