Published at Thursday, 28 March 2019. Industrial Machinery. By Adelisa Legrand.
Obviously, the easiest way to know which blade fits your table saw would be to consult the instruction manual. Also, use some common sense. There is a finite amount of space inside the arbor, so you can't use just any blade. The space is also limited with the presence of a blade guard. Speaking of the arbor, the central arbor hole on most table saw blades is 5/8 inches in diameter, but then again, there are exceptions to that rule. If the diameter and the arbor are supported by the saw, you are on the right track.
After you have penciled in a line where you want the cross-cut to be made, align it with the blade. With the saw turned on guide the miter gouge forward until the cut is made while making sure the board is firmly in place against the straight edge of the miter gouge. One of the simplest cuts a miter gouge allows you to make is a square cross-cut. Simply set the miter gouge at 90 degrees or zero (depending on the markings), and push the board toward the blade. The result will be a board that is cut square. You can also make angled cuts by setting the miter gouge at an angle of up to 45 degrees.
Blade Teeth. Blade teeth the more teeth on a blade, the smoother the cut. The majority of blades have between 24 and 80 teeth, expect for blades specifically designed to cut through certain materials. Why would you go with more or fewer teeth? More teeth ensures that the cut is smoother, but it also means the cutting will be done more slowly. Fewer teeth means faster cutting, but the cut will be rougher. A word to the wise: Do NOT EVER attempt to make the cutting faster by pushing the wood onto the blade. The only thing this will do is cause kickback, which will eject the wood back at you at a high rate of speed and potentially hurt you severely. So just be patient.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.