Published at Thursday, 28 March 2019. Industrial Machinery. By Adelisa Legrand.
Table Inserts. throat plate Table inserts, or throat plates as they are usually called are nothing more than thin pieces of metal or wood, mounted around the blade and leveled with the surface of the table. This prevents small pieces of wood from falling inside the arbor.
The blade tilt hand wheel is located on the side of the saw and allows you to tilt the blade up to 45 degrees away from the fence. The hand wheel which allows you to adjust the tilt of the saw blade is usually located on the left or right side of the unit depending on which way the arbor is made to tilt. Portable table saws usually don't give you as much control as professional cabinet saws though, and they often combine elevation and tilt adjustment in one wheel.
Riving knife an even better option would be to consider a table saw with a riving knife instead of a splitter. While both do roughly the same thing, there are some key differences between the two. The disadvantage of having a splitter instead of a riving knife is that the splitter is fixed, which means it doesn't move along with the blade. Because it's fixed, a splitter needs to be removed when making cross, non-through, and dado cuts. Unfortunately, many people tend to forget to put the splitter back in place when they start making rip cuts. So if you have a table saw which uses a splitter to prevent kickback, always remember to double-check that the splitter is in place.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.