Published at Wednesday, 06 March 2019. Industrial Machinery. By Adelisa Legrand.
Another option to think about is the magnetic switch. You can read more about this on my page about safety features, but in short this will prevent the motor from dangerous automatic restarts after power interruptions. A magnetic switch is more common on cabinet saws, but you may want to consider an upgrade on your contractor as well.
After you have penciled in a line where you want the cross-cut to be made, align it with the blade. With the saw turned on guide the miter gouge forward until the cut is made while making sure the board is firmly in place against the straight edge of the miter gouge. One of the simplest cuts a miter gouge allows you to make is a square cross-cut. Simply set the miter gouge at 90 degrees or zero (depending on the markings), and push the board toward the blade. The result will be a board that is cut square. You can also make angled cuts by setting the miter gouge at an angle of up to 45 degrees.
Blade RPM. The maximum speed of a blade is usually expressed in RPM (revolutions per minute). One thing you need to look for is the speed of the table saw, which must never exceed the speed of the blade. Blades are designed to rotate at a certain speed, and using it on a table saw which exceeds that speed will cause the blade to break apart due to centrifugal force. This is pretty much everything you need to know about blades. If you decide you want to learn even more about blades and their properties, this should serve as a good base for you to build upon.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.