Published at Wednesday, 27 March 2019. Industrial Machinery. By Adriene Michel.
Elevation and Tilt Wheels. Elevations and tilt hand wheel The blade elevation hand wheel is usually located on the front of the saw and allows you to control the height of the blade, which effectively controls the depth of cut. In the case of 10-inch blades, the blade should be exposed around 3-5/8 inches at its maximum height which is sufficient to cut through a 4 x 4 in a single pass.
Blade Materials. Diamond tipped masonry blades that are meant to cut plywood and hardwood are usually fabricated out of metal, but those that are designed to cut through harder materials require the use of even harder materials. The harder material is applied around the edge of the blade, with the metal core remaining intact.
Choosing the wrong blade will result in poor woodwork at best, and turn into a potential accident at worst. Now, in order to get the most out of the saw you paid for with your hard-earned cash, and to avoid any saw-related accidents, you need to learn a thing or two about the blades. This short guide I put together should teach you what you need to know. Check it out.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.