Published at Wednesday, 27 March 2019. Industrial Machinery. By Adriene Michel.
Table Saw Safety Features. The most noticeable and probably the most important safety feature is the blade guard, because it's very effective at keeping your fingers away from the danger zone – the saw blade. Truth is though, that many woodworkers don't like the blade guard because they can't measure and see the cuts if it's attached, especially if the guard is not made out of Plexiglas. They also complain that things like changing the blade or removing stuck wood take more time, so they often decide NOT to use the blade guard.
If you encounter some resistance while moving the fence, I would advise you apply some sort of lubrication like wax. Factory or stock gouges are sometimes poorly made, and most people correct this by purchasing an after market miter gouge. However, if you get a table saw with a bad fence and leave it that way, it's not a shortcoming for which you can easily compensate.
Blade Adjustments. Axis Adjustment Modern table saws allow the blade to be adjusted in various ways. The blade can be adjusted both vertically and by changing its axis. Vertical adjustments are made by exposing more of the blade, which changes the depth of cut. This comes in handy for thick pieces of wood as well as for non-through cuts. By adjusting the axis of the blade, you can make cuts at a certain angle, thus making bevel cuts, which are good for creating joints.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.