Published at Monday, 25 March 2019. Industrial Machinery. By Adelisa Legrand.
Blade Sizing. Blade Sizes there are two ways table saw blades are sized: their outside diameter, and the diameter of the mounting hole. Most standard blades for table saws are 8, 10 or 12 inches in diameter, but there are blades as small as 3 3/8 inches in diameter and as large as 30 inches in diameter. The bigger ones are designed for specific commercial purposes, of course, but man, that's a big blade!
Blade Materials. Diamond tipped masonry blades that are meant to cut plywood and hardwood are usually fabricated out of metal, but those that are designed to cut through harder materials require the use of even harder materials. The harder material is applied around the edge of the blade, with the metal core remaining intact.
Another option to think about is the magnetic switch. You can read more about this on my page about safety features, but in short this will prevent the motor from dangerous automatic restarts after power interruptions. A magnetic switch is more common on cabinet saws, but you may want to consider an upgrade on your contractor as well.
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.