Published at Sunday, 23 December 2018. Industrial Machinery. By Adelisa Legrand.
Band saw blade break-in procedure for longer blade life
All band saw blades, nevertheless of the manufacturer, want to be “broken in”. When newfangled, the teeth are evenhanded too sharp. Cutting at full rate will cause breaking of the quill edges which will lead to early blade disaster. Contravention in a saw blade attires off this excessive sharp edge and permits the blade to retain its cutting ability lengthier. Every producer takes their personal preferred way for blade break-in. Though, they all share the similar principles. Here is a failure of the finest applies for a band saw blade break-in process:
3 Steps for Better Blade Life: Blade Break-In Process
1. Maintain suggested band speed
2. Decrease feed pressure to ½ normal rate
3. Track at these settings for the initial 50 four-sided inches of material cut (150 four-sided inches on mild and little carbon steel)
Any content, trademark’s, or other material that might be found on the Lipadoo website that is not Lipadoo’s property remains the copyright of its respective owner/s. In no way does Lipadoo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 Lipadoo. All Rights Reserved.